Spray on roofing is a type of flat roofing services. This roofing system is applicable to every type of flat structural roof including a vertical or pitch up. Architects, engineers and building owners can attest to the fact that a good looking roof can easily raise an approximated market value of any property. It is therefore wise to paint roofs because it not only gives it a beautiful look but also protects the roofing for years but for a caveat, only if it’s properly done.

How to spray on a roof

spray on roofingSpray foam is basically a resin that foams at the tip of a spray gun and sprayed onto roofing surfaces that should initially be cleaned, brushed off, treat rust or other damages before any work is done. For the conventional galvanized iron sheet roofing, with the use of a pressure washer and hose to pressure wash, clear and clean the dirt. Using the connected hose and nozzle should allow for easy access around the roof while the machine remains on the ground. Allow the roof to dry before beginning your roof painting exercise. Foam roof is the roofing and insulation material that is used in roofing systems and are proven, through research, to be long lasting and very affordable. When well done, foam roofs have lasted for decades and by all accounts could last even longer. Foam roofs offer sustainability.

Types of roof spray foam

When applying any spray foam, the activity involves coating your roofing material with an insulation mixture composed of a resin that is sprayed, painted or brushed on a roofing system. It is important to apply a topcoat and then a primer afterwards. However, primer; the second coating is best applicable within 72 hours. Therefore the topcoat is the first coating applied on a foam roof. This is the basic roof paint for galvanized iron sheets. In order to make your work easier, the foam roof coatings can be done using a roller and brush. Additionally, it can be sprayed to speed up your application. That is a pricier activity and thus it is always advisable to have a crew for support whenever activities to paint or spray on roof coating is necessary.

The spray polyurethane foam is a roofing insulator that is a combination and mix of isocyanate and polyol resins. When insulator roofing is done the substrate has to be insulated properly in order to avoid wearing off and thus costly losses that can be occasioned by harsh weather. Avoid application of thick coats on the hottest place of the house will result in a thick skinny coat that will trap moisture in the paint that won’t be able to cure especially for galvanized roofing systems.

Benefits of spray foam roofing system

A spray foam roofing system has many advantages in comparison to the more traditional styles. It reduces a majority of leaks that are caused by seams and joints that interrupt the monolithic membrane that the polyurethane foam is applied. It gives the roof seamless appearance. Also it can be applied or painted to any surface where irregular protrusions are sorted. Additionally, the roofing insulator is light in weight and therefore prevents any resulting damage that might have been occasioned by heavier material. Lastly, the spray foam roofing system only needs a minimum of upkeep activities while creating little waste. More so, it can have long lasting life span.


Leave a Reply

Your email address will not be published. Required fields are marked *