TPO Roofing Cost

Are you considering installing a flat roof on your commercial property or your house? TPO roofing is one among the most famous roofing chosen by people. The cost of flat roof is comparatively lesser that the sloped or the pitches roofs. The cost of TPO roofing is about 1.7 dollars per square foot. This rate does not include the insulation.

TPO Roofing Material Pricing

TPO roofs are a great flat roof option.

TPO roofs are a great flat roof option.

The full form of TPO is Thermoplastic Polyolefin and it is relatively newer type of flat, single-ply roofing material which is of little more excellent quality than the modified bitumen or roll roofing, 2 of the most common flat roofing materials which are available in the market in today’s date. It was brought in to the United States market around the year 1990 and gives the house owners a material with energy saving, strong durability and high performance at a moderate cost.

How Much Does a TPO Roof Cost?

A TOP roof (Thermoplastic Polyolefin roof) is a new gen of single- ply flat roofing system which was brought in to the markets of the United States in the 1980s. Since that time, TPO roofing systems have acquired an ever- developing market share because of their combination of durability, performance and energy-savings.

Please note that the real TPO roofing cost will rely on the factors which include your location, the materials selected and the complication of the installation (that is, home height and roof pitch).

The cost of the TPO roofing begins at 2 dollars to 4 dollars per sq. Ft. and can go from 5 dollars to 10 dollars or more per sq. Ft. For a roof with Fifteen hundred outside sq ft. that is a low-end cost of 3000 dollars to 6000 dollars and high- end cost of 7,500 dollars to 15,000 dollars.

Disposing of the present roofing and adding of the existing roofing can cost an extra 1 to 3 dollars per sq. Ft.

TPO Roofing Cost Comparison

EPDM Rubber is among the most commonly used flat roofing systems for the residential houses displaying flat roofs or low-slope, in today’s date. For most of the part, it is a fairly sufficient low- slope alternate to the asphalt shingles which would generally need a minimum three to 12 roof pitches.

EPDM rubber roofing mean cost of installation is four dollars to 6 dollars per sq. Ft. or about 6000 to 9000 dollars for a fifteen sq. Flat roof. The cost can be lower or higher depending on the removal cost and the tear-off of the present roof, number of penetrations on your flat roof and the insulation layers.

For comparison, TPO roofs and PVC roofs cost an average of 5.5 to 7.5 USD dollars per sq. Ft. installed, which includes the labour and the materials warranty.

TPO Roofing Cost per Square Foot

The cost of TPO roof may need an onsite examination or check. Generally, these estimates will be “free of cost.” You can expect any appraisal to be presented with a comprehensive and detailed presentation/ sales pitch.

High or low labour cost range differences are in part because of the changes in job location, work load and seasonal wage rates.

Conclusion

You can save on the costs of installation by joining similar jobs and by being agreeable and ready to have your job finished during low demand periods for the installer/vendor. Decrease the total cost of the project by having many vendors bid on the same, itemized work requirement of your TPO Roof project. The installation costs of the TPO roof differ significantly by location.

Sources

Posted in Roofing

Leave a Reply

Your email address will not be published. Required fields are marked *

*